Volume 7, Issue 2, March 2019, Page: 47-51
Discussion on Design of Flow Assurance for High Pour Point Crude Oil Transportation Pipeline
Li Pengcheng, Department of Engineering Research and Design, CNOOC Research Institute Co., Ltd, Beijing, China
Lu Hong, Department of Engineering Research and Design, CNOOC Research Institute Co., Ltd, Beijing, China
Chang Yonglei, Department of Engineering Research and Design, CNOOC Research Institute Co., Ltd, Beijing, China
Wang Peiwei, Department of Engineering Research and Design, CNOOC Research Institute Co., Ltd, Beijing, China
Li Gen, Department of Engineering, China University of Petroleum, Beijing, China
Received: Jan. 28, 2019;       Accepted: Mar. 8, 2019;       Published: Apr. 2, 2019
DOI: 10.11648/j.ogce.20190702.11      View  248      Downloads  58
Abstract
Flow assurance is very important for design and operation management of the high pour point crude oil transportation pipeline. This paper choose one oil pipeline of CNOOC as an analysis example. Research on two main design plan according to the thermal management mode. In the heating, hot water preheating and displacement plan, the best temperature of hot water is existed. Hot water 88°C will be adopted. The greater of the preheating water flowrate, benefits thepreheating. The design flowrate 6359m3/d will be used. In skin effect electric heat plan, the pipeline insulation layer thickness of 80 mm and skin heating power of 2534 kw will be used through technical economical comparison, and the advantage of skin effect electric heat plan is analyzed relative to heating, hot water preheating and the displacement plan. The above research results may provide technical reference for the future design of high pour point crude oil transportation pipeline.
Keywords
High Pour Point, SEHT, Displacement, Flow Assurance, Shutdown and Restart
To cite this article
Li Pengcheng, Lu Hong, Chang Yonglei, Wang Peiwei, Li Gen, Discussion on Design of Flow Assurance for High Pour Point Crude Oil Transportation Pipeline, International Journal of Oil, Gas and Coal Engineering. Vol. 7, No. 2, 2019, pp. 47-51. doi: 10.11648/j.ogce.20190702.11
Copyright
Copyright © 2019 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Reference
[1]
Xu Yuhang, Hu Wenjie, and Bai Shutong, Selection and research of a high-condensation and high-wax crude oil pipeline process abroad [J]. Inner Mongolia Petrochemical, 2013, 7:4~7.
[2]
Chen Hongju, Zhou Xiaohong. Submarine Pipeline Transportation Process in Regional Development [J]. Petroleum Planning and Design, 2011, 22(4): 30-33.
[3]
Chen Hongju, Zhou Xiaohong, Wang Jun. Discussion on the design of flow safety protection for deep water natural gas pipeline [J]. China Offshore Oil and Gas, 2011, 23(2): 122-125.
[4]
Yang Xiaoheng. Design and Management of Oil Pipeline [M]. Dongying: China University of Petroleum Press, 2006: 251-253.
[5]
An Weijie. Offshore Oil Engineering Design Guide [M]. Beijing: Petroleum Industry Press, 2007: 31-33.
[6]
Nie Yongchen, Zhang Lei, An Shaogang, et al. Prediction of waxing regularity of high-condensation crude oil pipeline in Qinghai Oilfield [J]. Oil & Gas Field Engineering, 2017, 36(1): 11-14.
[7]
Guo Xiucui. Application of the skin effect electric heating of submarine pipeline in the oil and gas fields of southern Anhui Province [J]. China Offshore Oil and Gas (Engineering), 2003, 15(2): 20-23.
[8]
Fu Lei, Li Wenbin, Zhang Xueteng. Application of built-in skin effect electric heat tracing technology in oil collection system [J]. Oil and Gas Field Surface Engineering, 2016, 35(10): 58-61.
[9]
Wang Weiqiang, Wu Ming, Zhang Jing. Application Prospect of Electric Heat Tracing Technology in Crude Oil Transportation [J]. Oil and Gas Field Surface Engineering, 2004, 23 (8):26.
[10]
Wang Dong. Comparative Analysis of Active Heating Technology for Deepwater Submarine Pipeline [J]. Petrochemical Equipment, 2016, 45(3): 64-68.
Browse journals by subject